Will they fit my bike?
You may be able to mount our highway pegs on your bike, even though we haven't had the opportunity to test that year and model ourselves. We will continue adding examples below from customers who have successfully used our highway pegs on their motorcycle.
We currently offer two collar sizes. The diameter specs below are the inside diameter:
1" (or) 25.4 mm
.85" (or) 21.6 mm
There is a need for a clearance gap to accommodate the collar thickness, which is 3/8” thick. The pegs are each 5" long.
If you fit them on a horizontal bar, they will need to fold back when closed.
If you mount them on a vertical bar, they will need to fold up when closed.
We recommend holding your feet up in the area/section where you think you would like to mount the pegs and see if that will be a comfortable or beneficial position for you. Keep in mind how the pegs will mount on the bar and how they will need to fold in and extend out. Also consider any other parts of the bike that may protrude and block your legs from resting on the pegs in that position.
Also, be aware that the examples below may not match your experience. There are potential variables that we may be unaware of when we only have the experience of the customers below for our data. Your mileage may vary. We strongly suggest you check the dimensions of your crash bar with a caliper before ordering a set of pegs.
2023 BMW F850GS Adventure with OEM bars
|
One of our team members bought this bike, so we were able to test the pegs. The OEM crash bars are 1" diameter, the same as the larger R series BMW GS bikes. We used the 1" / 25.4MM collar pegs on a horizontal mount. |
 |
 |
 |
 |
 |
 |
2017 BMW R1200RT
|
"Love your product. I put a pair on my Harley Pan America and now my BMW R1200RT. The bars are not OEM. I don't know the manufacturer. I bought the bike used and the bars were already on them." -Richard This customer used the 1" / 25.4MM collar pegs on a horizontal mount. |
 |
 |
2007 BMW R1200GS with OEM bars |
|
"I love mine! They fold back and under, very high quality. Perfect for BMW GS." - Martin This customer used the 1" / 25.4MM collar pegs on a horizontal mount. |
 |
 |
2021 Honda Africa Twin ADV Sports DCT with aftermarket bars |
|
*NOTE* - We have received information from another customer that these crash bars may be larger than 1"/25.4MM. Please check your collar diameter with a caliper before placing an order.
"I found IMHO the BEST Highway pegs for adventure bikes. These pegs fold in and tuck under the crash bars (reducing the chance of snagging in a fall). They fit any 1" crash bar. They come unpainted but I sent them out for powder coating since my bike is all Black. These pegs seem very high quality. I am loving these pegs !!! Well done on the engineering."
- Jay
Mounted to Outback Motortek Crash Bars. This customer used the 1" / 25.4MM collar pegs on a horizontal mount, after experimenting with a vertical mount. |
 |
 |
 |
 |
 |
 |
2018 Honda Africa Twin DCT with aftermarket bars |
|
"I have an Africa Twin with after market 1" Dia. GIVI crash bars and the BMW ones fit perfectly. Long rides are no problem now."
- Kasey The engine guard model is for the 16-19 models (25mm GIVI DCT Engine Guards P/N TN1162). The pegs should also work on the non-DCT guards since they use the same bar stock and similar design shape. They also fit well reversed on the top side of the lower bar but since I'm taller I have them below. This customer used the 1" / 25.4MM collar pegs on a semi-vertical mount. |
 |
 |
 |
 |
2022 KTM Super Adventure with OEM Crash Bars |
|
"Nice addition to the 2022 KTM Super Adventure."
- Matt These are the OEM crash bars that fit both the R and the S models. The fit was very close, but I needed to make very minor adjustments to the outside edges of the clamp radius, using a Dremel and a fine grit sanding wheel to dial it in. This customer used the .85" / 21.6MM collar pegs on a horizontal mount. |
 |
 |
2021 Yamaha Ténéré 700 with aftermarket bars |
|
|
 |
 |
 |